EdgeOS VPN Opsætning
Spring til navigation
Spring til søgning
VPN setup
Forbind til CLI med et terminalprogram (Putty)
Gå i konfigurationsmode
configure
Set til local konfiguration
set vpn pptp remote-access authentication mode local
Definér brugernavn(e)
set vpn pptp remote-access authentication local-users username <brugernavn> password <adgangskode>
Set DHCP pool (de IP addresser der kan tildeles via VPN.
set vpn pptp remote-access client-ip-pool start 192.168.1.170 set vpn pptp remote-access client-ip-pool stop 192.168.1.175
Set ekstern IP adresse
Fast:
set vpn l2tp remote-access outside-address <ekstern IP>
Dynamisk (eth0 antages som WAN interface):
set vpn l2tp remote-access dhcp-interface eth0
Set DNS server adresser
set vpn pptp remote-access dns-servers server-1 8.8.8.8 set vpn pptp remote-access dns-servers server-2 8.8.4.4
Firewall setup
Tilføj regler
PPTP:
set firewall name WAN_LOCAL rule 30 action accept set firewall name WAN_LOCAL rule 30 description Allow_PPTP set firewall name WAN_LOCAL rule 30 destination port 1723 set firewall name WAN_LOCAL rule 30 log disable set firewall name WAN_LOCAL rule 30 protocol tcp
PPTP_GRE
set firewall name WAN_LOCAL rule 40 action accept set firewall name WAN_LOCAL rule 40 description Allow_PPTP_GRE set firewall name WAN_LOCAL rule 40 protocol GRE set firewall name WAN_LOCAL rule 40 log disable
Gem og aktiver setup
commit save