Harddisk spindown

Fra Millenium's Wiki
Version fra 12. dec 2013, 17:53 af Frank D (diskussion | bidrag) Frank D (diskussion | bidrag) (Tag changed from code to pre)
Spring til navigation Spring til søgning

== Opsætning af diske ==Få en liste med disk UUID's

sudo blkid

Disable intern APM (f. eks. WD Green diske).
Hvor a erstattes med det aktuelle device.

sudo hdparm -B 255 /dev/sda

Manuel spindown

sudo hdparm -y /dev/sda

Redigér /etc/hdparm.conf og tilføj

sudo nano /etc/hdparm.conf
/dev/sda {        apm = 255        poweron_standby = off        keep_features_over_reset = on}

== Spindown installering ==Først installeres build essentials

sudo apt-get install make g++ build-essential

Spindown hentes og installeres.

wget http://spindown.googlecode.com/files/spindown-0.4.0.tar.gztar xvzf spindown-0.4.0.tar.gzcd spindown-0.4.0/makesudo make install

Kopiér eksempel configuration til etc biblioteket.

sudo cp spindown.conf.example /etc/spindown.conf

Få en liste over disk ID's.

ls -l /dev/disk/by-id/

eksempel:

lrwxrwxrwx 1 root root  9 2012-02-12 16:34 ata-ST940210AS_5QX2B7LY -> ../../sda

Redigér /etc/spindown.conf og tilføj

sudo nano /etc/spindown.conf
[Disk 1]id = ata-ST940210AS_5QX2B7LYspindown = 1command = hdparm -y

Standard spindown tid er 1 time (3600 sek.). Denne ændres i /etc/spindown.conf i general sektionen.

idle-time = 3600    # The time in seconds a disk has to be idle before it is spundown.                    # Do not use a value that is to small (less than 3600) unless you                    # know what you are doing.

Spindown startes med

sudo service spindown start

== Status ==Status for diske.

sudo service spindown status

dette giver følgende output med information om hver disk.eksempel.

 * spindown is runningname     watched     active       idle-time        spindown-timesda            1          1               3                  600

Test om en disk er i standby.

sudo hdparm -C /dev/sda