Harddisk spindown

Fra Millenium's Wiki
Version fra 23. feb 2015, 15:26 af Frank D (diskussion | bidrag) Frank D (diskussion | bidrag) (Code examples fixed)
Spring til navigation Spring til søgning

Opsætning af diske

Få en liste med disk UUID's

sudo blkid

Disable intern APM (f. eks. WD Green diske).
Hvor a erstattes med det aktuelle device.

sudo hdparm -B 255 /dev/sda

Manuel spindown

sudo hdparm -y /dev/sda

Redigér /etc/hdparm.conf og tilføj

sudo nano /etc/hdparm.conf


/dev/sda {
          apm = 255
          poweron_standby = off
          keep_features_over_reset = on}


Spindown installering

Først installeres build essentials

sudo apt-get install make g++ build-essential

Spindown hentes og installeres.

wget https://spindown.googlecode.com/files/spindown-0.4.0.tar.gz 
tar xvzf spindown-0.4.0.tar.gz
cd spindown-0.4.0/
sudo make
sudo make install

Kopiér eksempel configuration til etc biblioteket.

sudo cp spindown.conf.example /etc/spindown.conf

Få en liste over disk ID's.

ls -l /dev/disk/by-id/

eksempel:

lrwxrwxrwx 1 root root  9 2012-02-12 16:34 ata-ST940210AS_5QX2B7LY -> ../../sda

Redigér /etc/spindown.conf

sudo nano /etc/spindown.conf

Og tilføj

[Disk 1]
id = ata-ST940210AS_5QX2B7LY
spindown = 1
command = hdparm -y

Standard spindown tid er 1 time (3600 sek.). Denne ændres i /etc/spindown.conf i general sektionen.

idle-time = 3600    # The time in seconds a disk has to be idle before it is spundown.
                    # Do not use a value that is to small (less than 3600) unless you
                    # know what you are doing.

Spindown startes med

sudo service spindown start

Status

Status for diske.

sudo service spindown status

dette giver følgende output med information om hver disk, eksempel.

 * spindown is running
name     watched     active       idle-time        spindown-time
sda            1          1               3                  600


Test om en disk er i standby.

sudo hdparm -C /dev/sda