Forskel mellem versioner af "OBD interface"

Fra Millenium's Wiki
Spring til navigation Spring til søgning
m (Frank D flyttede siden Opel OBD interface til OBD interface uden at efterlade en omdirigering: More generic.)
(Raspberry Pi link added)
Linje 72: Linje 72:
 
[http://www.openhardwarehub.com/projects/40-Arduino-CAN-BUS-OBD-Gas-Gauge CAN bus OBD gas gauge] <br/>
 
[http://www.openhardwarehub.com/projects/40-Arduino-CAN-BUS-OBD-Gas-Gauge CAN bus OBD gas gauge] <br/>
 
[http://vector.com/vi_candb_en.html DBC Communication Database for CAN] <br/>
 
[http://vector.com/vi_candb_en.html DBC Communication Database for CAN] <br/>
 +
[http://www.cowfishstudios.com/blog/obd-pi-raspberry-pi-displaying-car-diagnostics-obd-ii-data-on-an-aftermarket-head-unit Raspberry Pi OBD]  <br/>
  
 
[[category:bil]]
 
[[category:bil]]
 
[[category:obd]]
 
[[category:obd]]
 
[[category:opel]]
 
[[category:opel]]

Versionen fra 2. nov 2014, 13:38

Stik

16-pin Opel OBD connector

Car obd2.gif

Pin number Name Description
2 K-Line ABS diagnostic
3 K-Line Radio, automatic transmission, immobilizer, steering wheel and other components
4 GND Chassis ground
5 GND Signal ground
6 CAN-High, J-2284 If car isn't equipped with CAN bus, you'll find self-diagnostic slow codes (e.g. on Astra-F-G) or ABS K-Line at this pin
7 K-Line Engine, ABS, AT, Airbag, Navigation system, Radio diagnostic
8 K-Line TID, MID diagnostic
9 K-Line ABS, Airbag
11 K-Line Automatic transmission diagnostic
12 K-Line TID, MID, ABS, AirBag, air conditioner, Kuhlerlufter-Steuergerat
13 K-Line immobilizer, MID, Airbag diagnostic
14 CAN-Low, J-2284 if CAN present
16 +12V Accumulator

Links

Opel OBD2 Pinout
Opengauge
Arduino CAN-bus shield
MPGuino
CAN-BUS based OBD reader
Generel OBD-II PID's
CAN bus OBD gas gauge
DBC Communication Database for CAN
Raspberry Pi OBD