Forskel mellem versioner af "OBD interface"

Fra Millenium's Wiki
Spring til navigation Spring til søgning
Linje 67: Linje 67:
 
[http://code.google.com/p/opengauge/ Opengauge] <br/>
 
[http://code.google.com/p/opengauge/ Opengauge] <br/>
 
[http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.pdf Arduino CAN-bus shield]
 
[http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.pdf Arduino CAN-bus shield]
 +
[http://ecomodder.com/forum/showthread.php/obd-mpguino-gauge-2702.html MPGuino]
  
 
[[category:bil]]
 
[[category:bil]]
 
[[category:obd]]
 
[[category:obd]]

Versionen fra 3. mar 2012, 23:09

Stik

16-pin Opel OBD connector

Car obd2.gif

Pin number Name Description
2 K-Line ABS diagnostic
3 K-Line Radio, automatic transmission, immobilizer, steering wheel and other components
4 GND Chassis ground
5 GND Signal ground
6 CAN-High, J-2284 If car isn't equipped with CAN bus, you'll find self-diagnostic slow codes (e.g. on Astra-F-G) or ABS K-Line at this pin
7 K-Line Engine, ABS, AT, Airbag, Navigation system, Radio diagnostic
8 K-Line TID, MID diagnostic
9 K-Line ABS, Airbag
11 K-Line Automatic transmission diagnostic
12 K-Line TID, MID, ABS, AirBag, air conditioner, Kuhlerlufter-Steuergerat
13 K-Line immobilizer, MID, Airbag diagnostic
14 CAN-Low, J-2284 if CAN present
16 +12V Accumulator

Links

Opel OBD2 Pinout
Opengauge
Arduino CAN-bus shield MPGuino