Forskel mellem versioner af "OBD interface"

Versionen fra 19. apr 2012, 16:38

16-pin Opel OBD connector

Pin number	Name	Description
2	K-Line	ABS diagnostic
3	K-Line	Radio, automatic transmission, immobilizer, steering wheel and other components
4	GND	Chassis ground
5	GND	Signal ground
6	CAN-High, J-2284	If car isn't equipped with CAN bus, you'll find self-diagnostic slow codes (e.g. on Astra-F-G) or ABS K-Line at this pin
7	K-Line	Engine, ABS, AT, Airbag, Navigation system, Radio diagnostic
8	K-Line	TID, MID diagnostic
9	K-Line	ABS, Airbag
11	K-Line	Automatic transmission diagnostic
12	K-Line	TID, MID, ABS, AirBag, air conditioner, Kuhlerlufter-Steuergerat
13	K-Line	immobilizer, MID, Airbag diagnostic
14	CAN-Low, J-2284	if CAN present
16	+12V	Accumulator

@@ Linje 66: / Linje 66: @@
 [http://pinoutsguide.com/CarElectronics/opel_obd2_diag_pinout.shtml Opel OBD2 Pinout] <br/>
 [http://code.google.com/p/opengauge/ Opengauge] <br/>
-[http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.pdf Arduino CAN-bus shield]
+[http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.pdf Arduino CAN-bus shield] <br/>
-[http://ecomodder.com/forum/showthread.php/obd-mpguino-gauge-2702.html MPGuino]
+[http://ecomodder.com/forum/showthread.php/obd-mpguino-gauge-2702.html MPGuino] </br>
+[https://sites.google.com/site/hobbydebraj/home/can-bus-based-obd-reader CAN-BUS based OBD reader] <br/>
 [[category:bil]]
 [[category:obd]]